Cisco Nexus 7000 Series Command Reference Manual page 163

L Commands
logging password configuration
To enable the display of events related to password configuration changes, use the logging password
configuration command. To return to the default setting, use the no form of this command.
Syntax Description
rate-limit
number
Defaults None
Command Modes LDP configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to enable the display of events related to password changes:
switch# configure terminal
switch(config)# mpls ldp configuration
switch(config-ldp)# logging password configuration rate-limit 20
switch(config-ldp)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
logging password configuration [rate-limit number]
no logging password configuration [rate-limit number]
(Optional) Specifies rate limit logging.
(Optional) Messages per minute. The range is from 1 to 60 messages per
minute.
Modification
This command was introduced.
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
logging password configuration
1123