Authentication Window-Size - Cisco Nexus 7000 Series Command Reference Manual

authentication window-size

authentication window-size
To configure the tolerance for the window size for an out-of-sequence message, use the authentication
window-size command. To revert to the default type, use the no form of this command.
Syntax Description
neighbor
address ip-address
value
Defaults 1
Command Modes
RSVP configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines Use authentication window-size command to specify the tolerance for an out-of-sequence messages for
a neighbor or globally.
This command requires the MPLS Services license.
Examples
This example shows how to configure the tolerance for an out-of-sequence message for a neighbor:
switch# configure terminal
switch(config)# ip rsvp
switch(config-ip-rsvp)# authentication neighbor 1.1.1.1 window-size 1
switch(config-ip-rsvp)#
Related Commands# Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
120
authentication [neighbor address ip-address] window-size value
no authentication [neighbor address ip-address] window-size value
(Optional) Specifies the Resource Reservation Protocol (RSVP) neighbor.
(Optional) Specifies the RSVP neighbor address.
Maximum number of messages allowed in a window. The range is from 1 to
64.
Modification
This command was introduced.
Description
Protocol (LDP).
A Commands
OL-24994-02