Cisco Nexus 7000 Series Command Reference Manual page 178

mdt data bidir-enable
mdt data bidir-enable
To configure the range of group address used for data multicast distribution trees (MDTs), use the mdt
data bidir-enable command.
Syntax Description
This command has no arguments or keywords.
Defaults None
Command Modes Configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command allows the user to override the default behavior that is, create data MDTs for bidir routes
as well.
This command requires the MPLS Services license.
Examples This example shows how to configure the the range of group addresses used for data MDTs:
switch# config t
Enter configuration commands, one per line.
switch(config)# vrf context vrf1
switch(config-vrf)# mdt data bidir-enable
switch(config-vrf)#
Related Commands Command
show mvpn mdt route
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1130
mdt data bidir-enable
no mdt data bidir-enable
Modification
This command was introduced.
Description
Displays the details of the default and the MDT route.
End with CNTL/Z.
M Commands
OL-24994-01