Cisco Nexus 7000 Series Command Reference Manual page 207

M Commands
mpls static binding ipv4 vrf
To configure the Multiprotocol Label Switching (MPLS) static binding of labels to the IPv4 destination
VPN routing prefix, use the mpls static binding ipv4 vrf command. To return to the default setting, use
the no form of this command.
Syntax Description
vpn-name
prefix-mask
input
label
Defaults None
Command Modes
LDP configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
You must configure the MPLS VPN and VRFs before creating VRF-aware static labels.
This command requires the MPLS Services license.
Examples This example shows how to configure static label bindings input and output labels for several prefixes:
switch# configure terminal
switch(config)# mpls ldp
switch(config-ldp)# mpls static binding ipv4 vrf vpn100 10.2.0.0 255.255.0.0 input 17
switch(config-ldp)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
mpls static binding ipv4 vrf vpn-name prefix mask {input label | label}
no mpls static binding ipv4 vrf vpn-name prefix mask {input label | label}
VPN name. The maximum size is alphanumeric 32 characters.
Destination prefix and mask.
Specifies the incoming local label.
Label value.
Modification
This command was introduced.
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
mpls static binding ipv4 vrf
1159