As-Override - Cisco Nexus 7000 Series Command Reference Manual

as-override

as-override
To specify to override the autonomous system number (ASN) when sending an update, use the
as-override command.
Syntax Description This command does have any arguments or keywords.
Defaults
None
Command Modes
config-router-vrf-neighbor-af mode
Supported User Roles network-admin
vdc-admin
Command History Release
6.2.2
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to specify to override the ASN when sending an update:
switch# configure terminal
switch(config)# feature bgp
switch(config)# feature-set mpls
switch(config)# feature mpls l3vpn
switch(config)# feature bgp
switch(config)# router bgp 1.1
switch(config-router)# neighbor 209.165.201.1 remote-as 1.2
config-router-vrf-neighbor)# address-family ipv4 unicast
switch(config-router-neighbor-af)# send-community extended
switch(config-router-neighbor-af)# vrf 2hub
switch(config-router-vrf-neighbor)# address-family ipv4 unicast
switch(config-router-vrf-neighbor-af)# as-override
switch(config-router-vrf-af)#
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
114
as-override
Modification
This command was introduced.
A Commands
OL-24994-02