Cisco Nexus 7000 Series Command Reference Manual page 160

logging events frr-protection primary ready
logging events frr-protection primary ready
To configure the generation of system logs when a primary LSP moves to FRR-ready state on assigning
a backup tunnel, use the logging events frr-protection primary ready command. To stop logging these
system messages, use the no form of the command.
Syntax Description This command has no arguments or keywords.
Command Modes TE global configuration (config-te).
Supported User Roles network-admin
vdc-admin
Command History Release
7.3(0)D1(1)
Usage Guidelines No system message is logged if this feature is not configured.
Examples The following example shows how to configure generation of system messages when a FRR event
occurs:
switch# configure terminal
switch(config)# mpls traffic-eng configuration
switch(config-te)# logging events frr-protection primary ready
switch(config-te)#
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1120
logging events frr-protection primary ready
no logging events frr-protection primary ready
Modification
This command was introduced.
L Commands
OL-24994-01