New And Changed Information - Cisco Nexus 7000 Series Command Reference Manual

New and Changed Information

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus
7000 Series NX-OS MPLS Command Reference. The latest version of this document is available at the
following Cisco website:
http://www.cisco.com/c/en/us/support/switches/nexus-7000-series-switches/products-command-refere
nce-list.html
To check for additional information about this Cisco NX-OS Release, see the Cisco NX-OS Release
Notes available at the following Cisco website:
http://www.cisco.com/c/en/us/support/switches/nexus-7000-series-switches/products-release-notes-list
.html
The table below summarizes the new and changed features for the Cisco Nexus 7000 Series NX-OS
MPLS Command Reference, and tells you where they are documented.
Table 1 New and Changed Features
Feature
A commands
B commands
C commands
D commands
E commands
F commands
I commands
OL-24994-02
Description
allowas-in
as-override
autonomous-system
bridge-domain
control-word
demand-circuit
device ospf
disable-peer-as-check
echo revision
echo vendor-extension
encapsulation dot1q
feature evc
inherit port-profile
internetworking
interface pseudowire
Cisco Nexus 7000 Series NX-OS MPLS Configuration Guide
Changed in
Release
6.2(2)
6.2(2)
6.2(2)
6.2(2)
6.2(2)
6.2(2)
6.2(2)
1