Cisco Nexus 7000 Series Command Reference Manual page 409
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
Show Commands
show running-config isis
To display information about the Intermediate System-to-Intermediate System (IS-IS) configuration, use
the show running-config isis command.
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes
Router configuration mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to display information about the IS-IS configuration:
switch(config)# router isis
switch(config-router)# show running-config isis
!Command: show running-config isis
!Time: Sat Jul
version 5.2(1)
feature isis
router isis 1
router isis 2
router isis 20
router isis p1
switch(config-router)#
Related Commands
Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
show running-config isis
Modification
This command was introduced.
2 05:38:15 2011
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
show running-config isis
1331
Advertisement
Table of Contents
