Cisco Nexus 7000 Series Command Reference Manual page 246

record-route (TE interface configuration mode)
record-route (TE interface configuration mode)
To record the route used by the label switched path (LSP), use the record-route command.
Syntax Description
This command has no arguments or keywords.
Command Modes
TE interface configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to record the route by LSP:
switch# configure terminal
switch(config)# interface tunnel-te 1
switch(config-if-te)# record-route
switch(config-if-te)#
Related Commands Command
interface tunnel-te
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1198
record-route
Modification
This command was introduced.
Description
Configures the traffic engineering (TE) interface.
R Commands
OL-24994-01