Cisco Nexus 7000 Series Command Reference Manual page 314

show ip pim mdt
show ip pim mdt
To display the Protocol Independent Multicast (PIM) data multicast distribution tree (MDT)
information, use the show ip pim mdt command.
Syntax Description vrf
vrf-name
all
Defaults None
Command Modes EXEC mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples
This example shows how to display the MDT information for VRF instances:
switch(config-vrf)# show ip pim mdt vrf vpn4
MVPN Status Information for VRF "vpn4" : MTI(mti6) Up
Default MDT group 235.1.1.1 (Mode - ASM Shared)
switch#
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1236
show ip pim mdt [vrf {vrf-name | all}]
(Optional) Displays the virtual routing and forwarding VRF instance.
(Optional) VRF name. The maximum size is 32 alphanumeric characters.
(Optional) Displays information for all VRFs.
Modification
This command was introduced.
MTU: 1476
Configured tunnel source interface:
Default BGP tunnel source interface: loopback1
PIM Hello Interval: 30000 milliseconds
PIM JP Interval: 60 seconds
Data MDT Join Interval: 60 seconds
Data MDT Switchover Interval: 3 seconds
Data MDT Holddown Interval: 60 seconds
Data MDT Timeout Interval: 180 seconds
MDT Source address: 22.22.0.1 (iod loopback1)
BGP RD: 400:4 (set)
Data MDT: 232.8.8.0/24 threshold: 10
Show Commands
OL-24994-01