Cisco Nexus 7000 Series Command Reference Manual page 427

T Commands
timers lsa-arrival
To configure the link-state advertisement (LSA) arrival time, use the timer lsa-arrival command. To
return to the default setting, use the no form of this command.
Syntax Description
arrive-time
Defaults 1000
Command Modes Router configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to set the LSA arrival time:
switch# configure terminal
switch(config)# feature ospf
switch(config)#
bgp(config-router)# timers lsa-arrival 1200
bgp(config-router)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
timers lsa-arrival arrive-time
no timers lsa-arrival arrive-time
Arrival time. The range is from 10 to 600000 milliseconds.
Modification
This command was introduced.
test1
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
timers lsa-arrival
1223