Cisco Nexus 7000 Series Command Reference Manual page 191

M Commands
mpls ip
To enable IP over Multiprotocol Label Switching (MPLS), use the mpls ip command.
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes
Interface configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples
This example shows how to enable IP over MPLS:
switch# config t
Enter configuration commands, one per line.
switch(config)# interface ethernet 2/2
switch(config-if)# mpls ip
switch(config-if)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
mpls ip
Modification
This command was introduced.
Description
Protocol (LDP).
End with CNTL/Z.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
mpls ip
1143