Cisco Nexus 7000 Series Command Reference Manual page 180

mdt enforce-bgp-mdt-safi
mdt enforce-bgp-mdt-safi
To enforce the use of multicast distribution tree (MDT) subsequent address family identifiers (SAFI)
for a virtual routing and forwarding instance (VRF), use the mdt enforce-bgp-mdt-safi command. To
interoperate with peers that do not support MDT SAFI, use the no form of the command. When the no
form is used, initially only the (*,G) entry for the default MDT group is populated if it falls within the
Any Source Multicast (ASM) range. Then later, based on traffic, the (S,G) entries are learned like
regular ASM routes.
Syntax Description This command has no arguments or keywords.
Defaults Enabled
Command Modes VRF configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples
This example shows how to configure MDT to interoperate with peers that do not support MDT SAFI:
switch# config t
Enter configuration commands, one per line.
switch(config)# vrf context vrf1
switch(config-vrf)# no mdt enforce-bgp-mdt-safi
switch(config-vrf)#
Related Commands Command
show mvpn bgp
mdt-safi
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1132
mdt enforce-bgp-mdt-safi
no mdt enforce-bgp-mdt-safi
Modification
This command was introduced.
Description
Displays detailed information of the BGP advertisement for MVPN MDT
SAFI.
End with CNTL/Z.
M Commands
OL-24994-01