Cisco Nexus 7000 Series Command Reference Manual page 437

V Commands
vrf member
To set virtual routing and forwarding (VRF) membership on an interface, use the vrf member command.
To return to the default setting, use the no form of this command.
Syntax Description
vrf-name
Defaults None
Command Modes Interface configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to set VRF membership for an interface:
switch# configure terminal
switch(config)# interface ethernet 5/0
switch(config-if)# vrf member vpn1
switch(config-if)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
vrf member vrf-name
no vrf member vrf-name
VRF name. The maximum size is 32 alphanumeric characters.
Modification
This command was introduced.
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
vrf member
1233