Cisco Nexus 7000 Series Command Reference Manual page 193

M Commands
mpls ip default-route
To allow Multiprotocol Label Switching (MPLS) forwarding for the IP default route, use the mpls ip
default-route command. To revert to the default settings, use the no form of the command.
Syntax Description
This command has no arguments or keywords.
Defaults None
Command Modes LDP configuration interface mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to allow MPLS forwarding for the IP default route:
switch# config t
switch(config)# mpls ldp configuration
switch(config-ldp)# mpls ip default-route
switch(config-ldp)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
mpls ip default-route
no mpls ip default-route
Modification
This command was introduced.
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
mpls ip default-route
1145