Cisco Nexus 7000 Series Command Reference Manual page 235
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
P Commands
Command Modes
Class-map configuration mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to create a policy map to enforce a committed data rate of 256000 bps. If the
data rate is in conformance, the router sets the EXP field of the outer (topmost) label of the MPLS header.
If the data rate is exceeded, the router drops packets:
switch# configure terminal
switch(config)# policy-map policy1
switch(config-pmap-qos)# class Class2
switch(config-pmap-c-qos)# police cir 256000 conform set-mpls-exp-topmost-transmit violate
drop
switch(config-pmap-c-qos)# end
switch#
Related Commands
Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
Modification
This command was introduced.elli
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
police
1187
Advertisement
Table of Contents
