Ip Admission Proxy Http Refresh-All - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

ip admission proxy http refresh-all

To ensure that you see a customized WebAuth login page with the same name in the switch system
directory as a same-named prior login page, use the ip admission proxy http refresh-all command.
Syntax Description success
failure
refresh-all
login expired
login page
Defaults
If you do not enter this command, if any of the customized web-based authentication page files with the
file of same name have been changed, you see the old login page rather than the new file.
Command Modes Global configuration mode
Command History Release
15.0(2)SG
Usage Guidelines You should enter this command whenever the customized web-based authentication page has been
changed in the system directory.
Examples This example shows how to enter this command:
Switch# config terminal
Enter configuration commands, one per line.
Switch(config)# ip admission proxy http [success | failure | refresh-all | login]
Switch(config)# end
Switch#
<The new html page is observed.>
OL-27596 -01
ip admission proxy http [success | failure | refresh-all | login [expired | page]]
Successful authentication proxy.
Failed authentication proxy.
Refresh all custom html pages.
Specify expired webpage
Specify customized login webpage
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
ip admission proxy http refresh-all
End with CNTL/Z.
2-293