Table of Contents
Advertisement
9.2. Connection Settings
Click the name of the project to display the project tree for with the right button of the mouse, then from the right
button menu, click [Edit Project]. The project edit screen is displayed. Set connection settings in the "Step 3.
Communication" page of the Edit Project screen.
Select the communication method, and set the details for each communication method in the [Communication] field.
After setting the details, click the [Finish] button.
The content of the detailed settings for each communication method is explained from the following section
onwards.
Caution
Do not connect from multiple projects to 1 controller at the same
time.
Do not connect from multiple projects to 1 controller at the same time.
The same data may be referred to, and the data not read correctly.
Do not connect USB to multiple controllers from 1 computer.
When using USB connection, 1 computer can connect to only 1 robot controller. It is also not
possible to connect to multiple controllers using the USB hub.
9-96
Figure 9-1 Connection Settings
9-96
Advertisement
Table of Contents
