Mitsubishi Electric MELFA FR CR800 Series User Manual page 122

To change the position dividing the top and bottom screens, drag the border line with the mouse. Also, the display
position of each editing screen can be changed by dragging the title "position" or tab "XYZ"/"Joint"/"Work coordinate".
This is handy when you want to expand the command edit screen, for example because there are many lines of
commands. For details, see "11.5 Customizing the Display Position".
The background color for the command edit screen depends on the robot language used.
be changed from option screen.
editor".
11-122
For details, refer to "11.6.11Setting the background color of the program
Table 11-2 Command Edit Screen Background Color
Robot language
MELFA-BASIC VI
MELFA-BASIC V
MELFA-BASIC IV
Movemaster commands
Debugging means when the program is opened in debugging status.
(Initial
Background color
Normal Debugging
White
White
Light blue
Light yellow
Light green
The background color can
color)
11-122