Table of Contents
Advertisement
13.1.4. Parameter list reading
If no parameter name is displayed on the parameter list screen, you can read the parameter list.
Click the parameter list [Read] button in the upper-right of the parameter list screen. The Select parameter list
screen is displayed.
Figure 13-7 Parameter List Reading
Select the source to read from ("Read from RC" or "Read from file"), and then set the parameter list to read and
click the [OK] button.
13.1.5. Finding parameters
You can find a character string in the displayed parameter list. With the "Parameter list" screen active, click the
[Parameter] tab -> [Find] group -> [Find] button on the ribbon. The character string Find screen is displayed.
Figure 13-8 Finding a Character String
Input the character string to search for, and then click the [Find] button. Parameters that include the input
character string are displayed.
13-212
13-212
Advertisement
Table of Contents
