Table of Contents
Advertisement
21.6. Robot Display Settings
Display the 3D monitor and select the robot whose display settings are to be changed in the layout tree.
The display settings of that robot will be displayed at "Properties", and robot related display settings can be
changed at respective items.
Figure 21-41 Robot Display Settings
21.6.1. Robot information
When [Display project name]/ [Display robot type] is set to "True", each of the project name and hardware name
(model name of robot) are displayed near the mechanical interface position of the robot on the 3D monitor.
When both the project name and robot type are displayed, the project name is displayed at the upper level and
the robot type is displayed at the lower level.
The text size of the robot information displayed on the 3D monitor can be changed by selecting from [Large]/
[Middle]/ [Small] at [Size].
Figure 21-42 Displaying Robot Information
21-534
21-534
Advertisement
Table of Contents
