Automatic Calibration - Mitsubishi Electric MELFA FR CR800 Series User Manual

Industrial robots

Table of Contents

18.6. Automatic Calibration

You can set item about automatic calibration and generate the robot program.

This function can be used if the setting language is MELFA-BASIC VI and CR800 series robot controller and

automatic calibration control of Melfa Smart Puls function is effective. These parameters cannot be set by the

offline editing.

For more information see "MELFA-Smart plus User's Manual".

You click [Tool] -> [Automatic Calibration] from the project tree.

Figure 18-68 Automatic calibration screen