Items To Be Prepared By The Customer; Computer System; Computer Cable - Mitsubishi Electric MELFA FR CR800 Series User Manual

Industrial robots

Table of Contents

1.3. Items to be prepared by the customer

This explains what the customer needs to prepare in order to use this software

Use a computer that meets the specifications given in: "1.4 Operating Environment".

Prepare the cable for connecting the controller and the computer. The cable required depends on the connection

specifications and controller used, as shown below.

For the RS-232 cable refer to the "Standard Specifications" for your robot.

Table 1-1 CR800-D/CR750-D/CRnD-700/CRn500 Series Communication Cables

USB A type, USB mini B type

10BASE-T, 100BASE-TX

For controller front panel

For expansion option box (CR1-EB3)

Table 1-2 CR800-R/CR800-Q/CR750-Q/CRnQ-700 Series Communication Cables

USB A type to mini B type

10BASE-T, 100BASE-TX

For connecting by personal computer -

(when Personal computer connector is

D-sub, 9-pin)

Normal operation not guaranteed with USB to RS-232 cable

Normal operation is not guaranteed when using the USB to RS-232 cable. When using the RS-232

as a communication port, use of a computer with a serial port is recommended.

2D-232CBL03M

(for expansion serial

interface (option))

Cables confirmed by Mitsubishi Electric to operate

GT09-C20USB-5P

MR-J3USBCBL3M

Manufacturer

Mitsubishi Electric

Manufacturer

Loas Co., Ltd.

Elecom Co., Ltd.

Mitsubishi Electric System

Mitsubishi Electric