Table of Contents
Advertisement
6.2. Tool Tip Display of Ribbon Commands
An explanation for a command is displayed by moving the cursor over the command on the ribbon.
Figure 6-2 Tool Tip Display of Ribbon Commands
6.3. Minimizing the Ribbon
Minimizing refers to collapsing the command display area of the ribbon so that only the tab name is displayed. By
minimizing the ribbon, the area for displaying the editing screen, for example, can be increased.
Even with the ribbon minimized, ribbon commands can be operated by clicking the tab.
Figure 6-3 Ribbon in Minimized State
The ribbon can be minimized by either of the following operations:
・Select and check "Minimize the Ribbon" from the menu that is displayed by clicking ▼ at the ribbon top.
・Double-click one of the tabs.
To return a minimized ribbon to its original size, perform either of the following operations:
・Select and uncheck "Minimize the Ribbon" from the menu that is displayed by clicking ▼ at the ribbon top.
・Double-click one of the tabs.
6-65
6-65
Advertisement
Table of Contents
