9.2.5. CRnQ_R Communication Settings
CRnQ_R communication is a method to connect with a CR800-R/CR800-Q/CR750-Q/CRnQ-700 series controller
by using a RCPU, a PLC Universal model QCPU module or a PLC Ethernet Interface module.
When using RS-232 or USB, connect to the connector of the PLC Universal model QCPU module.
When using Ethernet, connect to the connector of the PLC RCPU, Ethernet Interface module or Built-in Ethernet
port QCPU.
On the CRnQ_R communication setting screen, when you select the computer interface, the communication
routes using the selected interface are displayed at the bottom of the screen. Select the communication route, then
press the [Detailed Settings] button. The detailed settings screen corresponding to the selected communications
route is displayed. These detailed settings will be explained from the next item.
9-102
The communication routes are displayed here.
Figure 9-6 CRnQ_R Communication Settings
9-102