Mitsubishi Electric MELFA FR CR800 Series User Manual page 614

(3) Delete
Deletes the selected signal connection row.
You can also delete multiple rows at the same time.
(4) Up / Down
Moves the selected signal connection row up/down.
You can also move multiple rows at the same time.
Signal connections are applied in descending order.
(5) Load
Loads signal definitions saved in an I/O simulator definition file.
Be aware that the signal selection settings shown in the signal connections list will be cleared.
(6) Save
Saves the current signal connection settings into an I/O simulator definition file.
During the I/O simulator operating, you can choose whether to apply the save setting to the I/O
simulator.
(7) Copy / Paste
Copies / Pastes signal connections.
You can copy / paste multiple rows at the same time.
(8) Paste in reverse
When both the source and destination are robots, you can swap source for destination by pasting.
23-614
Figure 23-3 Add/Edit signal connection.
23-614