Mitsubishi Electric MELFA FR CR800 Series User Manual page 524

Industrial robots

Table of Contents

Importing layout objects

Follow the procedure below to import layout objects in other layout files.

(1) Right-click the 3D monitor, layout object or a place where nothing is set on the layout tree, and select [Import

object] from the context menu.

(2) The select file screen is displayed. In this screen, select the file to import.

(3) If the selected file is a normal layout file, the layout objects in the selected layout file are imported to the

layout tree.

Also, layout objects can be imported from RT ToolBox2 layout files by similar operation.

Importing 3D model files

There are the following three ways to import a 3D model.

(1) In the properties of the layout object, you change the [3D model] to [Figure]. When [File] is displayed on

properties, you click the button displaying. When [3D model file select] is displayed, you choose 3D model file

that you want to import.

(2) In the layout tree, you right-click 3D monitor/layout objects/where does not show anything and select [Import

3D model] on context menu. When [3D model file select] is displayed, you choose 3D model file that you

want to import.

(3) Please you drag the 3D model files from Windows Explorer onto the tree. If it is supporting 3D model, you

can import it as an object.

Select and open

layout file to import

Figure 21-29 Importing Layout Objects