Mitsubishi Electric MELFA FR CR800 Series User Manual page 105

9.2.5.2. When USB is selected
When "USB" is selected as the computer interface, the communications routes that you can select are the same as
for RS-232. See "Table 9-6 Communication Routes That Can Be Selected for "RS-232"".
NET/10(H), CC IE through CPU Unit – Serial Communication Other Station Access) Detailed Settings
"(5) Network communication route setting of MNET/10" and "(6) Coexistence network route setting of C24" may not
be settable depending on the network route selected.
GOT (Ethernet) transparent mode, display the setup screen by clicking the "Setting" button, and set the
communication
Caution
CR800-R series controller has some communication paths that are not
supported.
CR800-R does not support the communication routes from "27.
access via G4" to "41.
access" in Table 9-6. Please use other route for communication.
9-105
Figure 9-8 USB (Serial Communication
Serial communication Ethernet via NET/10(H), CC IE remote - CC-Link other station
Serial communication CC-Link other station
items.
9-105