Operation Monitoring; Operating Information; Production Information - Mitsubishi Electric MELFA FR CR800 Series User Manual

14.4. Operation Monitoring

14.4.1. Operating Information

You can check the robot work time, battery usage time, etc.
From the project tree, double-click the target project [Online] -> [Monitor] -> [Operation Monitor] -> [Operating
Information].
Figure 14-48 Operating Information
When connected to the CR800 series robot controller, the remaining battery time is not displayed.
You can initialize the battery remaining time with [Maintenance] -> [Initialize]. For details on operation methods,
see "15.2.4 Initializing the battery remaining time".

14.4.2. Production Information

You can check the latest tact time, run time, cycle count, and average tact time for each program in the robot
controller. The latest tact time, run time, and average tact time can be measured up to 1193 hours (about 49
days).
From the project tree, double click the target project [Online] -> [Monitor] -> [Operation Monitor] -> [Production
Information].
Figure 14-49 Production Information
The production information is not constantly updated. Click the [Refresh] button as necessary.
14-317 14-317