Table of Contents
Advertisement
21. 3D Monitor
You can display the robots and their movements in multiple projects in 3D to check them.
Caution
When using the 3D monitor, we recommend using a high-performance PC.
Jog operation may not be performed properly if low-performance PC is used.
21.1. Starting Up 3D Monitor
Either double-click [3D Monitor] or [Online]/ [Offline]/ [Simulation] -> [<Robot model name>] from the project tree
or select [3D Monitor] from the context menu. The 3D display for the selected robot is displayed in the "3D
Monitor" screen. If the "Travel base setting for display" is set to the project, the travel base also is displayed.
In the offline mode, the robot is basically displayed at its fixed posture.
Double-click [3D Monitor] or
[robot model name, or select
[3D Monitor] in the context menu
Figure 21-1 Starting Up 3D Monitor
21-504
21-504
Advertisement
Table of Contents
