Mitsubishi Electric MELFA FR CR800 Series User Manual page 401

By clicking the [Stop Drawing] ( ) button in the [Oscillograph] tab -> [Drawing] group on the ribbon
while retrieving data from a robot, you can stop drawing of the graph and trace back the lines of the retrieved data
by shifting the slider.
Figure 18-11 Oscillograph graph screen during data acquisition (top)
A cursor is displayed while operating the slider. The value at the cursor position is displayed in [Data] of the
detailed data dialogue.
Figure 18-12 Cursor movement by slider operation
After acquiring data from the robot or after reading the data of the data file, double-clicking the value of
[Minimum] [Maximum] will move the cursor to the corresponding part according to the specified search direction.
However, it can not be used during data playback.
18-401 18-401