Document Out; Start-Up Of The Document Creation Screen - Mitsubishi Electric MELFA FR CR800 Series User Manual

24. Document out

You can create and save to the HTML document of information of the connected robot controller and the offline
settings.

24.1. Start-up of the document creation screen

There are two methods of starting document out screen.
[Method (1)] Starting from the project tree
Select the Offline, Online or Simulation of the targeted project in the project tree and click the right mouse
button. The context menu will open, so click [Document Out]. Document Out dialog is displayed.
[Method (2)] Starting from the ribbon
Select the item in the Offline, Online or Simulation of the targeted project from the project tree. Click the
[Document Out] button in [Home] tab -> [Document] group from the ribbon, then Document Out dialog is
displayed.
Caution
During editing the parameter or the robot program
During displaying the parameter list screen or the program edit screen in the project, you can
not use this function.
After closing the parameter list screen and the program edit screen, please use this function.
About the displayed position of 3D monitor
When you output the image of the 3D monitor to the document, please move the 3D monitor to
the position to see (Even the part is possible). If the 3D monitor is completely hidden by other
windows (project tree, properties window or others), correct image can not be output.
24-622
Figure 24-1 Starting Document Out Screen from the project tree
Figure 24-2 Starting Document Out Screen from the ribbon
24-622