Mitsubishi Electric MELFA FR CR800 Series User Manual page 520

21.4.2.8. Copying layout objects
Follow the procedure below to copy a layout object in the layout tree.
(1) Select the layout object to copy, and select [Copy] from the context menu.
(2) Right-click the copy destination layout object, 3D monitor or a place where nothing is set on the layout tree,
and select [Paste] from the context menu.
(3) The layout object is copied. Any child layout objects included with the layout object also are copied together.
When the parent object of a copied layout object is changed, its display position in the 3D monitor will not be
changed, and it will be displayed overlaid on the copy source layout object. The [Position] value at "Properties" is
changed to the relative position from the copy source layout object or origin.
21-520
1
Figure 21-24 Operation of Copying Layout Objects
Figure 21-25 Changing the Position Value by Copy
2
Copy and
paste
3
21-520