15.3.4. Settings
Here, you can set the timing for collecting information concerning maintenance forecasts, the notification method,
etc.
(1) Enables maintenance
forecasting
(2) Information
collection level
(3) Notice interval
(4) Warnings
(5) Output dedicated
output signal
(6) Operating time
per day
(7) Remainder
When the [Write parameters] button is clicked after setting each item, the setting values are written into the
controller. All items take effect after they are written into the controller, except for signal numbers of dedicated
outputs. If a dedicated output signal has been changed, it is necessary to power on the controller again.
For details on the setting items, see "Table 15-4 Description of the Setup Screen".
15-339
Figure 15-16 Setup
15-339