Table of Contents
Advertisement
17.3. Offline backup (Offline project -> PC)
This function is save the offline setting/data as backup data to the personal computer. In this function, the kind of
backup is fixed "All".
Use this function in the offline mode.
(1) In the project tree, select the [Offline] in the target project and right click, then the context menu will be
displayed.
(2) Select the [Backup] in the context menu, then "New Backup folder" dialog will be displayed.
(3) In this dialog, specify the folder location and name for save the backup data, and click the [OK] button.
(4) After the backup is completed, the backup data is displayed in the [Backup] -> [All] in the project tree.
The backup data created by this function can be used not only for restore to the offline project described in "17.4
Offline restore (PC -> Offline project)" but also for restore to the robot controller described in "17.2 Restore
(PC -> Robot)".
By restore the backup data to the robot controller, you can be reflected the contents of simulation setting to the
robot controller.
17-383
Figure 17-12 Offline backup
17-383
Advertisement
Table of Contents
