Table of Contents
Advertisement
17.2. Restore (PC -> Robot)
You can transfer the backup information on the computer to the robot controller.
Use the restore function while connected to the robot controller.
Caution
Caution on individual restoration of individually backed up by
It is possible to restore each item (Program, Parameter files and System program) of the data
backed up by selecting "All files".
At this time, the data files of the specified item are transferred to the robot controller, without
clearing (initializing) all the information in the robot controller.
(1) From the project tree, open the target project [Backup]. In the backup tree, the information backups for "All ",
"Program", "Parameter", and "System program", respectively, is displayed.
(2) Select the information listed on the controller, then click the right mouse button. From the right mouse button
menu, select [Restore].
17-379
selecting "All"
Figure 17-9 Backup Project Tree Diagram
Figure 17-10 Restore
17-379
Advertisement
Table of Contents
