Mitsubishi Electric MELFA FR CR800 Series User Manual page 425

18.3.2.4. Program execution content
The content of the program being executed is displayed. Up to 7 lines can be displayed.
(1) Click the position (block) in which the content of the program is displayed (<a>). The left side of the program
execution content is arranged in this position.
(2) After the "Select item" window is displayed, click the [Robot information] button (<b>).
(3) Select "Exe line" (<c>) as the type on "Create robot information" window.
(4) After setting the information on the execution content, click the [OK] button (<d>).
<1>
<2>
<3>
<d>
<1> Size :
<2> Slot :
<3> Color :
18-425
<c>
Figure 18-32 Creating a display of the program execution content
Set the width of the box in which the content of program is displayed. A value
from 1 to 16 can be set.
Select the task slot number for which the program is executed.
The range of slot numbers that can be set differs according to the system using it.
Select the background color of the area where the program execution content is
displayed.
<a>
<b>
When User definition screen (TB) is shown
18-425