Mitsubishi Electric MELFA FR CR800 Series User Manual page 516

21.4.2.5. Copying a hand / robot parts / user mechanism
Follow the procedure below to copy a hand / robot parts / user mech. in the layout tree.
(1) Select the hand / robot parts / user mech. to copy, and select [Copy] from the context menu.
(2) Right-click again on the copy destination robot, and select [Paste] from the context menu.
(3) The selected hand / robot parts / user mech. is copied to the right-clicked robot.
Or, a hand / robot parts / user mech. can be copied immediately under a specific hand by right-clicking that hand /
robot parts / user mech. and selecting [Paste].
Figure 21-19 Operation of Copying Hands / Robot Parts / User Mechanism
21-516
Select item to copy
and click [Copy]
1
Select copy
destination robot
and click [Paste]
3
2
21-516