Configuring The H.248-Based Voice Service (On A Web Page) - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
l
----End

12.4.1.5 Configuring the H.248-based Voice Service (on a Web Page)

The OLT is connected to the remote ONU through a GPON port to provide users with the IP-
based high-quality and low-cost VoIP service.
Prerequisite
l
l
l
l
Context
Table 12-21 Data plan
Item
ONU line profile
Issue 01 (2014-04-30)
Create an Internet access service VLAN and add an upstream port to it. Add upstream
port 0/19/0 to VLAN 100.
huawei(config)#vlan 100 smart
huawei(config)#vlan attrib 100 stacking
huawei(config)#port vlan 100 0/19 0
Create Internet access service flows. Set S-VLAN ID to 100 and GEM port ID to 14.
Use traffic profile ftto_hsi.
huawei(config)#service-port vlan 100 gpon 0/1/0 ont 1 gemport 14 multi-
service
user-vlan 45 tag-transform translate-and-add inner-vlan 1001 inbound
traffic-table
name ftto_hsi outbound traffic-table name ftto_hsi
huawei(config)#service-port vlan 100 gpon 0/1/0 ont 2 gemport 14 multi-
service
user-vlan 45 tag-transform translate-and-add inner-vlan 1002 inbound
traffic-table
name ftto_hsi outbound traffic-table name ftto_hsi
3. Save the data.
huawei(config)#save
The ONU does not need to be configured.
The interface data and POTS port data corresponding to the MG interface have been
configured on the MGC.
The OLT has been connected to the MGC. The OLT can ping the IP address of the MGC
server successfully.
The ONU has been added to the OLT. For details, see
OLT.
Different voice services require different ONU software versions. Before the configuration,
ensure that the ONU software version supports H.248. For details, see relevant ONU
manuals.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12 FTTO Configuration(SOHO and SME)
Data
Profile name: ftto_line
T-CONT ID: 4
GEM port ID: 12
12.3.3 Adding an ONU to an
1152