GE LOGIQ E9 Service Manual page 41

GE H
EALTHCARE
D 5180263-100, R
IRECTION
Section 1-3
Important conventions
1-3-1 Conventions used in book
1-3-1-1 Model designations
This manual covers the LOGIQ E9 scanners listed in
on page
1-3-1-2 Icons
Pictures, or icons, are used wherever they will reinforce the printed message. The icons, labels, and
conventions used on the product and in the service information are described in this chapter.
1-3-1-3 Safety precaution messages
Various levels of safety precaution messages may be found on the equipment and in the service
information. The different levels of concern are identified by a flag word that precedes the precautionary
message. Known or potential hazards to personnel are labeled in one of three ways:
• DANGER
• WARNING
• CAUTION
When a hazard is present that can cause property damage, but has absolutely no personal injury risk,
a NOTICE is used.
DANGER IS USED TO INDICATE THE PRESENCE OF A HAZARD THAT WILL
DANGER
CAUSE SEVERE PERSONAL INJURY OR DEATH IF THE INSTRUCTIONS ARE
IGNORED.
WARNING IS USED TO INDICATE THE PRESENCE OF A HAZARD THAT CAN CAUSE
WARNING WARNING
SEVERE PERSONAL INJURY AND PROPERTY DAMAGE IF INSTRUCTIONS ARE
IGNORED.
CAUTION IS USED TO INDICATE THE PRESENCE OF A HAZARD THAT WILL OR CAN CAUSE
CAUTION
MINOR PERSONAL INJURY AND PROPERTY DAMAGE IF INSTRUCTIONS ARE IGNORED.
EQUIPMENT DAMAGE POSSIBLE.
Notice is used when a hazard is present that can cause property damage but has absolutely no
NOTICE
personal injury risk.
Notice Example: Disk drive may crash.
NOTE: Notes are used to provide important information about an item or a procedure.
NOTE: Be sure to read the notes; the information contained in a note can often save you time or effort.
5
EV
1-4.
Chapter 1 Introduction
LOGIQ E9 Service Manual
1-2-3 "LOGIQ E9 models covered by this manual"
1 - 7