GE LOGIQ E9 Service Manual page 112

GE H
EALTHCARE
D 5180263-100, R
IRECTION
3-9-3 How to Get the LOGIQ E9 to Recognize another Device on the Network
Table 3-9
1.
2.
3.
4. Save your changes and then press Ping. A "Smiley Face" indicates
3 - 40
5
EV
Utility -> Connectivity -> Device screen
Press Add. The system creates a device called "NewDevice."
Change the name to one of your choosing.
Enter the IP address of the device.
successful communication between your LOGIQ E9 and the device. A "Frown"
indicates failed communication. Check the following:
• Is the device running?
• Is it connected to the network?
• Did you enter the right IP address?
Section 3-9 - Connectivity Setup and Tips
Ping / Smiley
LOGIQ E9 Service Manual