GE LOGIQ E9 Service Manual page 128

GE H
EALTHCARE
D 5180263-100, R
IRECTION
3-9-4-4 How to Setup and Use a DICOM Print Service (cont'd)
Print Service Use
As with a DICOM Image Storage Service, the provides three ways to send images to a Print Service:
1.) Dataflow
2.) Print Button
3.) Send To
The setups and uses are basically the same, except when the Format of the Print Service is set to
something other than 1x1. Then, if the Print Service is tied either to a dataflow with Direct Store set, or
to a print button, the will hold each image in its spooler until the number of images specified by Format
is reached. For example, a Format of 3x4 specifies 12 images per sheet. Until you press the print button
12 times, the sends nothing to the Print Service. If you press the print button 24 times, the sends the
images in two batches of 12 each. Any images left on the spooler when you start a new exam or end
the patient are sent at that point.
3 - 56
5
EV
Section 3-9 - Connectivity Setup and Tips
LOGIQ E9 Service Manual