GE LOGIQ E9 Service Manual page 522

GE H
EALTHCARE
D 5180263-100, R
IRECTION
8-9-6-1 HDD removal
Table 8-73
1.
Loosen the thumb screw or screws at the top of the BEP cover that attach the cover to the BEP.
Tilt the top of the BEP cover away from the BEP.
2.
Disconnect:
• the battery cable from J3 on the EPS
(Extended Power Shutdown) Board.
• the cables (1) connecting the EPS to the
BEP.
Set the BEP cover aside.
3.
Remove the screw that secures the HDD
bracket.
8 - 158
5
EV
HDD removal
Steps
Section 8-9 - BEP (Back End Processor) parts replacement
LOGIQ E9 Service Manual
Corresponding Graphic
inside of BEP Cover, EPS and cables