GE LOGIQ E9 Service Manual page 397

GE H
EALTHCARE
D 5180263-100, R
IRECTION
8-5-4 Foot Rest Bumper replacement
8-5-4-1 Manpower
One person, 15 minutes.
8-5-4-2 Tools
No additional tools required.
8-5-4-3 Preparations
When preparing for the replacement, you must perform the following steps:
1.) Power down the system
2.) Disconnect the mains power cable from the wall outlet.
3.) Disconnect all Probes and External I/O Cabling.
Follow these links if you need more information:
• 4-2-4 "Power shut down" on page 4-7.
8-5-4-4 Foot Rest Bumper removal
The Foot Rest Bumper is fixed with snap locks.
1.) Pull the Foot Rest Bumper upwards and over the pedals to release the snap locks, while freeing the
side latches.
You may need to push down the pedals to be able to remove the Foot Rest Bumper.
5
EV
Figure 8-23 Side Latch for Foot Rest Bumper
Chapter 8 Replacement procedures
LOGIQ E9 Service Manual
8 - 33