GE LOGIQ E9 Service Manual page 458

GE H
EALTHCARE
D 5180263-100, R
IRECTION
Table 8-44
3. Remove the hex nut.
8-6-8-2-4 Mode Encoder Replacement
Table 8-45
1. These encoders plug into the headers on the board; so remove the nut from the top side and pull
out the encoder from the bottom side.
NOTE: The elastomer is on the top side.
8 - 94
5
EV
Depth-Type Joystick Encoder Replacement
Steps
Mode Encoder Replacement
Section 8-6 - Replacing Top Console Parts
Corresponding Graphic
Joystick Encoder Nuts (top view of board)
Step
LOGIQ E9 Service Manual