GE LOGIQ E9 Service Manual page 105

GE H
EALTHCARE
D 5180263-100, R
IRECTION
3-7-3-4 Printer/DVR Checks
Check that Printer/DVR work as described below:
Table 3-6
Step
1.
Press Freeze.
Press (Print 1), (Print 2), (Print 3) or (Print 4) on
2.
the Control Panel
3.
Press [VIDEO] icon on the Control Panel.
4.
Press [VIDEO] icon on the Control Panel
5.
Press [RECORD] icon on the Control panel.
6.
Press [PLAY] icon on the Control panel.
7.
Press [STOP] icon on the Control panel.
3-7-3-5 Turn OFF Power to LOGIQ E9
See: 3-6-8 "Power shut down" on page
3-7-4 Available Probes
See: Section 9-18 "Probes" on page
3-7-5 Software Options Configuration
3-7-5-1 Software Option Installation
A password (Software Option String) enables a software option or a combination of software options.
This password is specific for each LOGIQ E9.
5
EV
Peripheral Checks
Task to do
Chapter 3 LOGIQ E9 Setup
Stops image acquisition.
Prints image displayed on the screen on Black and White or Color
printer, depending on the key assignment configuration.
Brings up the DVR Touch Panel (if the customer has the DVR option).
Returns to the scanning mode
Starts Recording.
Plays back an examination.
Stops recording.
3-26.
9-63.
LOGIQ E9 Service Manual
Notes
3 - 33