GE LOGIQ E9 Service Manual page 492

GE H
EALTHCARE
D 5180263-100, R
IRECTION
8-8-2-5 Front Casters installation
1.) Position the Caster so it align with the fastening screw.
2.) Install the three fixing screws (M8 x 20 mm), torque: 20.5 Nm (15.1 lbf-ft).
3.) Remove the Wooden Wedge.
4.) Roll the system off the Bevel Edged Board.
5.) To replace the other Front Caster, repeat all the steps from
8-127,
system.
6.) Install the Foot Rest Cover.
8 - 128
5
EV
but now using the Bevel Edged board and the Wooden Wedge on the other side of the
Section 8-8 - Casters and Brakes replacement
LOGIQ E9 Service Manual
8-8-2-4 "Front Casters removal" on page