GE LOGIQ E9 Service Manual page 422

GE H
EALTHCARE
D 5180263-100, R
IRECTION
8-6-2-3 LCD Monitor V2 removal (used in R4.x and later production)
A cover at the rear side of the LCD Monitor assembly covers the cable to the monitor. To get access to
the cable connector, remove the Cable Cover.
Table 8-16
1.
Remove the LCD Cable Cover fixing
screws.
2.
The LCD Cable to LCD is secured to the
LCD with a retaining screw (1), an EMC
shielded retainer (2) and two phillips
screws (3).
Remove the screws and retainer.
Disconnect the Cable from the LCD.
8 - 58
5
EV
LCD Monitor V2 removal (used in R4.x and later production)
Steps
Section 8-6 - Replacing Top Console Parts
LOGIQ E9 Service Manual
Corresponding Graphic