GE LOGIQ E9 Service Manual page 241

GE H
EALTHCARE
D 5180263-100, R
IRECTION
Table 6-8
Rotate the threaded lead screw on the
3.
actuator, (4) counterclockwise until the lock
nut is barely touching the bearing housing
(5) of the threaded lead screw and the two
plastic springs just touch, but do not
deform. Make sure the lever is loose and
engages with the lock wheel, (6), as shown.
Before reassembling the lock assembly,
make sure the nut, (2) and lever (3) are in
the position, as shown.
5
EV
XY Manual Release for Lock and Brake Mechanism
Steps
Chapter 6 Service Adjustments
LOGIQ E9 Service Manual
Corresponding Graphic
Park Lock WILL NOT engage
when in these positions
Adjustment Set
6 - 15