GE LOGIQ E9 Service Manual page 400

GE H
EALTHCARE
D 5180263-100, R
IRECTION
8-5-5-4 Front Cover removal
1.) Unscrew the two Phillips screws that fix the Front Cover Assembly to the chassis.
2.) Pull the upper end of the Front Cover out and upwards to free it from the pedals and the frame.
NOTE: The Front Cover Assembly is made of two pieces. See: Figure 8-24.
8-5-5-5 Front Cover installation
1.) Thread the Front Cover so it fits in between chassis and pedals.
2.) Align the Front Cover guide pins with holes in the frame.
3.) Fasten Front Cover with two Phillips screws. See: Figure 8-24.
4.) Install the Foot Rest Bumper.
5.) Install the Top Cover.
6.) Install the Side Covers.
8 - 36
5
EV
Figure 8-24 Screw placement, Front Cover
Section 8-5 - Replacing Covers and Bumpers
LOGIQ E9 Service Manual